How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Russell H. Your Own Question

Russell H.
Russell H., Service Tech
Category: Camera and Video
Satisfied Customers: 9538
Experience:  8+ years of professional experience
13568747
Type Your Camera and Video Question Here...
Russell H. is online now
A new question is answered every 9 seconds

I have a ez view smo-151qn camera 1 has a flashing l on the

Customer Question

i have a ez view smo-151qn camera 1 has a flashing l on the bottom with no image on the monitor ,how do i fix it?
Submitted: 1 year ago.
Category: Camera and Video
Expert:  Russell H. replied 1 year ago.
Hi, thank you for contacting JustAnswer.com. My name is Russell. I will do my best to provide the right answer to your question.
Check the cable that runs from the monitor to the camera 1, along its entire length, looking for strains, severe bending, cuts, etc., ...and at both ends especially.
If the retaining clip on either end of the cable is broken off, then the cable will easily slip out of the jack, even slightly being capable of interrupting the camera image as you have seen.
Replace the cable if necessary.
After which, make sure the camera is being supplied with power. If that is the case, then you may perhaps have a defective camera, unfortunately.
Let me know what you find out, and I will advise you further.

Related Camera and Video Questions