How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Michael Your Own Question

Michael
Michael, Technician
Category: Camera and Video
Satisfied Customers: 9133
Experience:  Over 25 years experience in the field of electronics repair, TV, VCR and computer repair.
11519491
Type Your Camera and Video Question Here...
Michael is online now
A new question is answered every 9 seconds

Date and time not displayed on videotaping

Customer Question

Date and time not displayed on videotaping
Submitted: 1 year ago.
Category: Camera and Video
Expert:  Michael replied 1 year ago.
Hi and thank you for choosing Just Answer.
I am Tech Michael and I will be assisting you today.
Please be patient as these are technical questions that may require a bit of conversation to solve. Also remember to be detailed in your description of the problem. That will help me make a diagnosis quickly for you.
Do you want it to display that info on the tape when the tape is played back?
Also do you have the user manual for this machine?
Thank you
Tech Michael
Customer: replied 1 year ago.
Yes. When I begin to videotape the date and time is not displayed as I video.
The accurate date and time has been programmed into the camera.
I have a user's manual.
This problem just began, has worked properly in the past
Expert:  Michael replied 1 year ago.
Hi there is a way to turn off the taping of the info like date and time for your unit, Please refer to unit's manual p22.
Let me know if this helps or you still have an issue?
I will stick with you until your unit is working correctly, You can always get in touch with me if you need further assistance after rating. Please rate my service kindly thus far, it is the only way I receive credit for my time with you;-)
It won't cost you anything additional to rate;-)
Thank you and have a great Sunday!
Tech Michael
Customer: replied 1 year ago.
I am looking at pg 22.
I don't have a Remote Commander.
Is there another way to do the same function using the camera and not the Remote Commander?
Expert:  Michael replied 1 year ago.
Hi for this function I believe you need the remote. Did the unit come with one?
Customer: replied 1 year ago.
I'm sure there was one, but I don't have one now.
Customer: replied 1 year ago.
What has caused the date and time to stop being displayed as it was earlier?
Expert:  Michael replied 1 year ago.
Hi you would need that to make this change. You can get an exact replacement remote for that unit fro either of these two sites, Its best to call them for this to be sure to get the correct one, also they DON'T list all the remotes on line;-)
Please visit: www.remotes.com and www.mrremote.com.
Both or one will have this for you and its the exact same one that came with the camcorder.
I will stick with you until your unit is working correctly, You can always get in touch with me if you need further assistance after rating. Please rate my service kindly thus far, it is the only way I receive credit for my time with you;-)
It won't cost you anything additional to rate;-)
Thank you and have a great Sunday!
Tech Michael
Expert:  Michael replied 1 year ago.
It won't cost you anything additional to rate;-)
Please rate my service kindly thus far, it is the only way I receive credit for my time with you;-)
Thank you and have a great day!
Tech Michael