How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, Engineer
Category: UK Plumbing
Satisfied Customers: 3629
Experience:  Domestic Gas, Commercial Gas, LPG, Unvented Hot Water, Part P Electrical, Commercial Catering
46681511
Type Your UK Plumbing Question Here...
Andrew Smith is online now
A new question is answered every 9 seconds

I have a british gas 330 boiler and it has an F1 fault. It

Customer Question

I have a british gas 330 boiler and it has an F1 fault. It says i should press the reset button but I don't know where the reset button is.
Submitted: 9 months ago.
Category: UK Plumbing
Expert:  Andrew Smith replied 9 months ago.

There may be a reset position on your selector knob?

Expert:  Andrew Smith replied 9 months ago.

F1 means it has failed to light, there may be an underlying problem

Customer: replied 9 months ago.
the instruction book said press reset and if fault reappears contact an engineer, no reset on the selector knob
Expert:  Andrew Smith replied 9 months ago.

Do you have the GC number of the appliance - they have made a few.

These are British Gas re-badged boilers, they don't make them

Expert:  Andrew Smith replied 9 months ago.

Did you manage to sort this?

Customer: replied 9 months ago.
had to call a plumber out
Expert:  Andrew Smith replied 9 months ago.

No problem, glad you are sorted

Related UK Plumbing Questions