How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, Engineer
Category: UK Plumbing
Satisfied Customers: 3591
Experience:  Domestic Gas, Commercial Gas, LPG, Unvented Hot Water, Part P Electrical, Commercial Catering
46681511
Type Your UK Plumbing Question Here...
Andrew Smith is online now
A new question is answered every 9 seconds

Boiler works on CH but not on DHW pump runs fan run but no

Customer Question

boiler works on CH but not on DHW pump runs fan run but no ignition
JA: I'll do all I can to help. Tell me a bit more about what's going on so we can help you best.
Customer: turn tap on everything works but no ignition
JA: Anything else I can tell the Plumber before I connect you two?
Customer: no
JA: I'm sending you to a secure page on JustAnswer so you can place the $5 fully refundable deposit now. While you're filling out that form, I'll tell the Plumber about your situation and connect you two.
Submitted: 7 months ago.
Category: UK Plumbing
Expert:  Andrew Smith replied 7 months ago.
Do you have the make and model?

Related UK Plumbing Questions