How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Ridley Your Own Question
Rick Ridley
Rick Ridley, UK Heating Engineer
Category: UK Plumbing
Satisfied Customers: 1561
Experience:  30 Years on the tools, now retired, Ex CORGI
15546140
Type Your UK Plumbing Question Here...
Rick Ridley is online now
A new question is answered every 9 seconds

I have just put a new MT10 timer in. It's ticking away but

Customer Question

Hi i have just put a new MT10 timer in. It's ticking away but not moving round to set timer off. Any suggestions. Cheers Dave
Submitted: 1 year ago.
Category: UK Plumbing
Expert:  Andrew Smith replied 1 year ago.

Can you give it a full twist and see it it starts spinning, if not check the electrical connections as it may not be getting enough power to turn the clock.

If that does not work then it is a faulty timer

Customer: replied 1 year ago.
it's a brand new timer, when fitted, timer comes on but won't knock off
Expert:  Andrew Smith replied 1 year ago.

It definitely sounds like the motor turning the clock is either faulty and not powerful enough or is not getting the right voltage.

Customer: replied 1 year ago.
The timer comes on but does not switch off. I have turned timer knob fully and there is not a problem with the supply, Cheers Dave

Related UK Plumbing Questions