How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, Engineer
Category: UK Plumbing
Satisfied Customers: 3586
Experience:  Domestic Gas, Commercial Gas, LPG, Unvented Hot Water, Part P Electrical, Commercial Catering
46681511
Type Your UK Plumbing Question Here...
Andrew Smith is online now
A new question is answered every 9 seconds

Trying to relressurise a potterton heat max combi, which

Customer Question

Hi, trying to relressurise a potterton heat max combi, which looks like it needs a rigid loop. However, there's a copper pipe joining the two pipes together so I can't get access.
Submitted: 1 year ago.
Category: UK Plumbing
Expert:  Andrew Smith replied 1 year ago.

Is there no braided flexible pipe under the boiler?

Customer: replied 1 year ago.
Thanks for the response. No there isn't. There are three taps, none of which increase the pressure on any combination. The two isolation calves are connected by a copper pipe so when I unscrew the nuts I can't take them off. I wondered whether whoeve fitted it left the copper pipe in the middle in error? The manual says there should be a copper tool to repressurise but it's a new house and we weren't left a tool.
Customer: replied 1 year ago.
Sorry about the typos - valves instead of calves, obviously.
Expert:  Andrew Smith replied 1 year ago.

Can you take a picture and upload it please

Related UK Plumbing Questions