How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gallagher99 Your Own Question
Gallagher99
Gallagher99, FORD SENIOR /SPECIALIST TECHNICIAN
Category: UK Ford
Satisfied Customers: 3138
Experience:  SVQ LEVEL 3, QAULIFIED FORD SENIOR/SPECIALIST TECHNICIAN , ATA REGISTERD ,12 YEARS EXPERIENCE
17855046
Type Your UK Ford Question Here...
Gallagher99 is online now
A new question is answered every 9 seconds

Have a problem with VP30 pump. Can you help me?

Customer Question

Have a problem with VP30 pump. Can you help me?
Submitted: 4 months ago.
Category: UK Ford
Expert:  Gallagher99 replied 4 months ago.

Hi there good morning to you and Iam sorry for the delayed response
My name is ***** ***** I would be happy to assist you today

Ok what is the issue you have regarding the fuel pump

Does the vehicle start or is it I acrank no fire (glow plug light flashing

What has been done thus far to resolve this

Regards ***** *****

Brian

Customer: replied 4 months ago.
The transistor was changed and now the error P1608 FIP Watchdog signal lost
Expert:  Gallagher99 replied 4 months ago.

Do you mean the RIM module on top of the pump was replaced (was this recoded to the immobilsor)

What was the original fault

Just now is it a crank no fire issue

Regards Brian

Customer: replied 4 months ago.
Not replaced. I have changed only the transistor which controls the fuel dosing electromagnet. Before this it was P1664 and P1564. Now after changing it gives me P 1608
Customer: replied 4 months ago.
May you can give me a list of analogue part number of mine YS6Q-9A543-RC