How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Trainer/Master tech.
Category: UK Ford
Satisfied Customers: 3498
Experience:  Trainer 8+ years, Master tech. 10+ years, SAE member
30385560
Type Your UK Ford Question Here...
Billy is online now
A new question is answered every 9 seconds

My van ford transit mk6 have lost acceleration! goes

Customer Question

Hello,my van ford transit mk6 have lost acceleration! goes up to 3000rpms and no more,timing chain changed,fuel pump also still same thing
Submitted: 1 year ago.
Category: UK Ford
Expert:  Billy replied 1 year ago.
Hello and welcome! I'm Billy and i will assist you with this. Feel free to ask if further info is needed.
do you have any warning lights on dash? (engine light mostly)
which exact engine do you have, is it the tdci? (the engine code would be great, it would be like: F1FA or D3FA)
Customer: replied 1 year ago.
No warning lights at all,its ford trandit mk6 2003
Customer: replied 1 year ago.
Tdci
Expert:  Billy replied 1 year ago.
Hello again,
The most common fault on this 2.0 TDCi engine causing this would be a loose earth strap. Ford issued a technical service bulletin on this, which i will include so you check accordingly:
Problem
Lack of power.
Engine vibrations, hesitations and misfiring under light engine loads.
One of following trouble codes stored: P0201, P0202, P0203, P0204 - (injector - circuit malfunction).
Cause
Poor earth connection underneath battery.
One or more calibration codes missing/corrupt.
Incorrect injector calibration code in engine control module (ECM).
Remedy
Locate and check condition of earth point.
Carry out injector calibration code programming in engine control module (ECM).
Kindly get back to me with your findings, or if further assistance is needed.
Regards,
Billy