How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike Your Own Question
Mike
Mike, Technician
Category: UK Ford
Satisfied Customers: 39198
Experience:  34 years experience of motor vehicle diagnostics
9261905
Type Your UK Ford Question Here...
Mike is online now
A new question is answered every 9 seconds

1999 ford ranger: torque..inlet..diesel..two wheel drive ,non turbo

Resolved Question:

i need to know the head bolt tightening sequence and torque,and the inlet and outlet valve clearances for a 1999 ford ranger diesel pick up two wheel drive ,non turbo,engine number WLAT116653
Submitted: 5 years ago.
Category: UK Ford
Expert:  Mike replied 5 years ago.
Hello and Welcome back to justanswer...This is MIKE , I have helped you before...


I will give you all that info that you require in an image file... that way , you can print it off and take it to the vehicle with you ...

For that - click HERE.

The valve clearances :

Inlet - 0.05 to 0.15 mm
Exh - 0.15 to 0.25 mm These should be done with the engine COLD.

I Sincerely XXXXX XXXXX have helped you ...but do ask me if you need anything more...

Kind Rgds - MIKE...


 

  • >>>>>>>>>Please don't forget ....Please press the ACCEPT button if you are happy with my answer/advice given - as that's how I get paid for my time, knowledge and expertise given. Thank you.

Feedback and any Bonuses are always appreciated too. Thank you.



Edited by MIKE on 2/2/2011 at 6:56 PM EST
Mike and other UK Ford Specialists are ready to help you