How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob Your Own Question
Bob
Bob, UK Ford Car Mechanic
Category: UK Ford
Satisfied Customers: 2046
Experience:  ATA Tech, Ford Tech,6 Years with Ford, 4 years with MG Rover
19517166
Type Your UK Ford Question Here...
Bob is online now
A new question is answered every 9 seconds

Ford fiesta: o4..plate..eac faulit and it wont rev over 2000rpm

Resolved Question:

i have a fault with my ford fiests 1.2 o4 plate when i start it sometimes it comes up eac faulit and it wont rev over 2000rpm
Submitted: 7 years ago.
Category: UK Ford
Expert:  Bob replied 7 years ago.

Hi there hope i can be of assiatnce.

 

Ok this means there is a fault with the acceleration control. EAC means Electronic Acceleration Control.

 

The usual susopect on the 1.25 duratech engine is the throttle poteniometer. This is intergrated into the accelerator pedal.

 

It will restrict your revs to 2000rpm as the car will be in 'limp home' mode. This prevents any further damage to engine components.

 

The fault will be able to be easily and quickly diagnosed with the aid of a diagnostic scan of the cars on board computer.

 

Thanks bob

Bob and other UK Ford Specialists are ready to help you