How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Russell H. Your Own Question
Russell H.
Russell H., Technician
Category: UK Electronics
Satisfied Customers: 9528
Experience:  Repairing devices of UK and European make for over 20 years.
13568747
Type Your UK Electronics Question Here...
Russell H. is online now
A new question is answered every 9 seconds

I have a sharp up - 700 The till turns on but when buttons

Customer Question

I have a sharp up - 700
The till turns on but when buttons are pressed nothing happens
Submitted: 1 year ago.
Category: UK Electronics
Expert:  Russell H. replied 1 year ago.

Hi, thank you for contacting JustAnswer.com. My name is Russell. I will do my best to provide the right answer to your question.

Check that the manager key (or just 'key') is inserted, and turned to something other than RST.

It should probably be turned to the REG position.

What shows up on the register's display,

A: when first turned On, and

B: when you press buttons ?

And does the register beep at any time?

Customer: replied 1 year ago.
The display shows
Overlapped clk clerk remained 0004
The till doesnt bleep when any keys are pressed
Expert:  Russell H. replied 1 year ago.

Is the message on the display:

OVERLAPPED CLK

CLERK REMAINED

0004

or something very like that? I just want to be sure that I understand correctly.

Customer: replied 1 year ago.
that is correct
Expert:  Russell H. replied 1 year ago.

OK. Let me research that error (or condition) message for a bit, then get back to you, please. Thanks.