How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Engineer
Category: UK Electronics
Satisfied Customers: 15448
Experience:  Over 16 years experience of installing, troubleshooting, and manufacturing and repair of electronics.
Type Your UK Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

E00 code on Sam4s cash register how do i remove it

Customer Question

E00 code on Sam4s cash register how do i remove it
Submitted: 4 years ago.
Category: UK Electronics
Expert:  Pete replied 4 years ago.
Hello and welcome to JustAnswer, thanks for requesting me to assist with your question today.

The E00 code on your SAM4S cash register indicates a Sequence Error.

You can try an Initial Clear to reset the error:

1. Turn the power switch located on the right side of the register to the OFF position.
2. Turn the control lock to the P position.
3. Press and hold the key position where the SBTL key is located on the default keyboard layout.
4. While continuing to hold the SBTL key, turn the power switch to the ON position.
5. The message "INITIAL CLEAR OK!” prints when the initial clear is complete.

You may have to try the Initial Clear procedure a few times to clear the E00 error.
Expert:  Pete replied 4 years ago.

I'm just following up with you to see how everything is going. Did my answer help?

Let me know,


Related UK Electronics Questions