How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: UK Car
Satisfied Customers: 21968
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your UK Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Limp mode, Ml270 children 2000, Changed to and electrical

Customer Question

Limp mode
JA: What is the model/year of your Mercedes?
Customer: Ml270 children 2000
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: Changed to and electrical plug new fluid. And filter. Contact plate
JA: How many miles are on the car? How has your mileage been lately?
Customer: 233000
JA: Anything else you want the mechanic to know before I connect you?
Customer: Comes up with a encline. Sensor. N41
Submitted: 3 months ago.
Category: UK Car
Expert:  sprinkles08 replied 3 months ago.

Hello and welcome to JustAnswer!

I see that your trans is in limp in. There are many possible causes for limp in including the speed sensors on the lead plate that was replaced but it coul also be a solenoid issue, wiring and connections, the trans controller or electronic shifter module, or an internal trans problem.

The first thing that needs to be done is determine what fault codes are currently setting. If you clear the codes, drive it and allow it to go into limp in, what fault code numbers are setting currently?

Related UK Car Questions