How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg Your Own Question
Greg
Greg, Shop Owner
Category: UK Car
Satisfied Customers: 6808
Experience:  17 years Shop Owner /Technician. 27 years experience,
29331485
Type Your UK Car Question Here...
Greg is online now
A new question is answered every 9 seconds

I have a Dodge Durango 5.7 with an ABS light on. I did a

Customer Question

Hi. I have a Dodge Durango 5.7 with an ABS light on. I did a scan and I've got the code C121D ( Brake Pressure Sensor Circuit). Any ideas?
JA: Is it just the ABS light? Or is the brake system warning light on, too?
Customer: Only ABS and ESP
JA: What year is your Durango?
Customer: 2007
JA: Are you fixing your Durango yourself? What have you tried so far?
Customer: Yes. I am doing it by myself. I've already changed the ABS computer. I went to a dealer and he told me to do so.
JA: Anything else you want the mechanic to know before I connect you?
Customer: I don't think so.
Submitted: 1 month ago.
Category: UK Car
Expert:  Greg replied 1 month ago.

Hi, I'm Greg (Indy-Tech).
Welcome to JustAnswer. I'm reviewing your question now, and will post back with your reply ASAP.
Rgds Greg.

Expert:  Greg replied 1 month ago.

Hi Lucian

What malfunction codes did you have before you replaced the ABS module .

Greg

Customer: replied 1 month ago.

That's a pretty difficult question . I did it for a few months ago so , I don't remember .

Expert:  Greg replied 1 month ago.

Hi Lucian .

Okay they probably told you to replace the module as this is the most common issue for this code .

But should of been tested before doing this .

But you may find your problem is in fact the ICU Integrated control unit ..

Need further assistance with this issue then please get back to me with the reply box below .
After rating there is no further cost for any other question relating this issue .
Kind regards Greg

Customer: replied 1 month ago.

Hi Greg. can you explain better "ICU" ?

Expert:  Greg replied 1 month ago.

This is the part of the fuse and relay box under the hood attachment is showing location .

Rgds Greg

Customer: replied 1 month ago.

Can you tell me if I can buy a used one or do I have to buy a new one ? does it have to be programed with the car or it is just an plug and play?

Expert:  Greg replied 1 month ago.

Should be fit and play on this This is also known as the Front control module

Greg

Customer: replied 1 month ago.

TThanx. I will try to get another one tomorrow and I will let you how it goes .

Expert:  Greg replied 1 month ago.

Sounds Good all the best .

You did check all the wiring and connectors .

Greg