UK Car Repair Questions? Ask a Mechanic for Answers ASAP
Hi Im David, Signal too high:Short-circuit to supply voltage in the signal cable. Defective injector.
let me find that info. i do know that the plugs to them are a problem and the terminals get corroded. we just splice in new pig tails.
injectors shoud read 12.8-14.5 ohms
not that im aware of, but a visual check is always good.
no. i see where you have that problem but it wont affect the injector circuit
sure, hold on a sec, thanks
sounds like you have a fuse for the abs blown. ill try to find a diagram to point out which fuse.
check the fuse panels under the hood and in the passenger compartment for any that are labeled abs or brake control. look in the owners manual under fuses. i cant seem to find any labeled strictly for abs. sorry
.5 ohms? thats not correct. it doesnt matter what injectors you are using. try one thats reading good, 3 or 4
the injectors are reading .5 ohms disconnected?
i gotta look at the specs for those. give me the part numbers if you can
I can not find anywhere it gives me the resistance specs for those injectors. you may need to contact bosch directly.
i have not. but let me dig
you would get a fuel code from the cem i would think