UK Car Repair Questions? Ask a Mechanic for Answers ASAP
If you still have an issue then it could be a flexible brake line is ballooning under pressure, this can't always be seen from the outside so to test this use a hose clamp on each line in turn to close off then lines one at time . Push the pedal in between and see if you can feel any difference as each line is closed off.
if this doesn't help then its possible that you need to run the ABS pump to move any trapped air inside
the dealer method is to use the diagnostic tool to cycle the ABS during bleeding
however I've had good results by just taking the car for short drive and stamping on the pedal at low speed to lock the brakes and trigger the ABS
and then re-bleed
do you still need help?
Bear in mind that the site takes a deposit from you at the beginning and this is held by the site until you rate my answer at which point the cash is split between the site and the expert. I am only paid for my work on this question if you rate my answer, using the star system at the top of the screen. Please do not forget! Thank you