How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg Your Own Question
Greg
Greg, Shop Owner
Category: UK Car
Satisfied Customers: 6808
Experience:  17 years Shop Owner /Technician. 27 years experience,
29331485
Type Your UK Car Question Here...
Greg is online now
A new question is answered every 9 seconds

I have a ford ranger 2010 built in Thailand with 4 cyl. non

Customer Question

I have a ford ranger 2010 built in Thailand with 4 cyl. non turbo diesel marked 2900 0n the valve cover. The engine has been rebuilt but we are having trouble with the timing. Can you
give me info on the timing?
Submitted: 4 months ago.
Category: UK Car
Expert:  Greg replied 4 months ago.

Which diesel engine do you have

2.2 L Duratorq I4 (diesel)
3.2 L Duratorq I5 (diesel)

2.5 WLE

Greg

Customer: replied 4 months ago.
VIN # ***** 4 CYL. , No Turbo, 2010 Ford Ranger, Built in Thailand, The only marking on the
engine is on the valve cover is 2900. This is an engine they put in Mazda as well as Ford.
Expert:  Greg replied 4 months ago.

Okay good have a diagram showing you the positions of the two cam sprockets .

and the high pressure pump pulley.

Be careful with the cam pulleys they are identical so make sure the E and I are on the correct side .

Still need additional information then please get back to me with the reply button, and not the poor or bad service, this way i can get back to you or suggest another expert if needed.

Your deposit does not pay me until the answer is rated in a positive way,
A bad rating does not constitute a refund.

If you are not happy or you have sorted out your problem before the answer then please let me know with the reply button .

Kind regards Greg.

Customer: replied 4 months ago.
This engine only has 1 cam so do not understand your answer. If you cannot help say so!!!
Expert:  Greg replied 4 months ago.

One cam .okay let me check that would normally be the WL2.5 and 2.9 /let me check in the ford data base for this engine you have .

Rgds Greg

Customer: replied 4 months ago.
If you can ck the data base I gave you the VIN#. This should give you the info which I cannot get.
Expert:  Greg replied 4 months ago.

Sorry will have to opt out can not find anything on the 2.9L .

Rgds Greg

Customer: replied 4 months ago.
I trust my money will be refunded, I only received questions and no answers. I will in turn let you know the
answer when I get it.
Regards ricky