How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marty Your Own Question
Marty
Marty, European Car Expert
Category: UK Car
Satisfied Customers: 400
Experience:  ASE & Bosch Certified Master Tech. Over 30 years experience.
13230946
Type Your UK Car Question Here...
Marty is online now
A new question is answered every 9 seconds

My Bakkie dont want to start with the ignition but when you

Customer Question

Hello my Bakkie dont want to start with the ignition but when you push it it starts easy .I have tested the injectors replaced the common rail the top sensors , the glow plugs . Had a computer on the system the pressure in the rail if it is off is 430kpa is there a other place to check?
JA: Does the engine turn over? How old is the battery?
Customer: Brand new Batt and it crank but it dont whant to start
JA: What is the model/year of your Ford?
Customer: Ford ranger 2008 3.0lt tdlc
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Yes because nobody can fix it so now i want to try
Submitted: 9 months ago.
Category: UK Car
Expert:  Gallagher99 replied 9 months ago.

Hi there good evening to you and sorry for the delayed response

My name is ***** ***** I would be happy to assist you tonight

Ok are there any fault codes being logged in the PCM

Is this intermitent or is it every time you attempt a start up

Does the vehicle run fine apart from this starting concern

Does it eventually fire up if you continue cranking

Kind regards ***** *****

Brian