How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: UK Car
Satisfied Customers: 21598
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your UK Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Im from Germany and have a Problem with the gearshift to the

Customer Question

Hello Chris
Im from Germany and have a Problem with the gearshift to the Navigator05.
when I go off the accelerator, the transmission always switches up and down.
my Ford dealer has the transmission and the control valves all checked. Everything OK.
in the fault memory, nothing is stored. what can it be.
Is there a control problem?
Submitted: 5 months ago.
Category: UK Car
Expert:  Technicaldan replied 5 months ago.

Has anyone tested the signal from the throttle position sensor?

I wonder if it is erratic when you change throttle position, hence the gear changing, but no errors because as far as it knows it is reacting normally to the throttle position information received?

Do you have access to diagnostics and live data?

Customer: replied 5 months ago.

that makes my Ford dealer,

while this error occurs shows the onboard computer simultaneously
Overdrive out

Expert:  sprinkles08 replied 5 months ago.

Hello and welcome to JustAnswer!

As mentioned, an inaccurate throttle position signal would be a likely cause for what you're describing if no codes are setting.

Do you still need help?