How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: UK Car
Satisfied Customers: 21606
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your UK Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Toyota puris: Toyta puris 2015 t3 came in with a tyre pressure

Customer Question

Toyta puris 2015 t3 came in with a tyre pressure light on then checked the pressure all out so reset the tyre pressure light , but the abs light and traction appeared and know it comes with faults c1203 and c1336
Submitted: 6 months ago.
Category: UK Car
Expert:  sprinkles08 replied 6 months ago.
Hello and welcome to JustAnswer!C1203 is for a component configuration mismatch and C1336 is for the yaw sensor's calibration not being stored. This would be set if the sensor or ABS module were replaced and calibration wasn't done with a scan tool. The configuration code could also possibly set if the ABS module was replaced and not programmed, or especially if with a used one.Have any repairs been done recently?Is the car not under basic warranty?

Related UK Car Questions