How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: UK Car
Satisfied Customers: 21417
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
Type Your UK Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

300c: I have a p1408 code on my chrsyler 300crd as engine

Customer Question

Hi I have a p1408 code on my chrsyler 300crd as engine management light comes on even after reset. Cleaned egr valve and stills comes on. Read on here says it's dpf filter
Submitted: 5 months ago.
Category: UK Car
Customer: replied 5 months ago.
There is no loss of power of limp mode. Drives perfectly fine also. Going to put a dpf cleaner in first
Customer: replied 5 months ago.
(Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  sprinkles08 replied 5 months ago.
Hello and welcome to JustAnswer!P1408 isn't a valid code for the vehicle information supplied. I'm seeing that you have a 2007 300 with a 3.0 diesel. If that's correct then this code isn't valid, it may have just been written down wrong or it may have been reported incorrectly if you're using an aftermarket scan tool or code reader.Do you have the VIN?

Related UK Car Questions