How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg Your Own Question
Greg
Greg, Shop Owner
Category: UK Car
Satisfied Customers: 6806
Experience:  17 years Shop Owner /Technician. 27 years experience,
29331485
Type Your UK Car Question Here...
Greg is online now
A new question is answered every 9 seconds

I am having difficulty timing the crank up before installing

Customer Question

Hi i am having difficulty timing the crank up before installing the cams on a mini 1.4 r56 57plate. When it's timed at 90degrees before tdc and all the pistons are at the same level does it matter which revolution of the crank it is when I lock it as I knew you can lock it 180degrees out?
Submitted: 1 year ago.
Category: UK Car
Expert:  Greg replied 1 year ago.

No as long as long as the crank shaft locking pin is fitted in then no problem .

Then you have to lock the cams in place with the cam clamps .

Then fit the chain .

Please remember to only rate my answer when you are 100% satisfied.

IF you feel the need to click either "Helped a little" or "I expected more",
please stop and reply to me via the CONTINUE CONVERSATION button with the issue you have.
I will be happy to continue further and do everything I can to provide you with the service you seek.

Kind regards Greg.