How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marty Your Own Question
Marty
Marty, European Car Expert
Category: UK Car
Satisfied Customers: 395
Experience:  ASE & Bosch Certified Master Tech. Over 30 years experience.
13230946
Type Your UK Car Question Here...
Marty is online now
A new question is answered every 9 seconds

Park brake fault present after rear pad and disc change

Customer Question

park brake fault present after rear pad and disc change c1336 and c1346 present on a 2012 avensis and will not clear
Submitted: 1 year ago.
Category: UK Car
Expert:  Billy replied 1 year ago.
Hello and Welcome! I'm Billy and i will assist you with your inquiry. Feel free to ask if any further info is needed.
My apologies for the delay, thank you for your patience.
Those should be the sensors (yaw rate, lateral acceleration) needing zero point calibration.
Using the scan tool (most likely toyota), but you can check as the launch x431 should also do it, you can try and calibrate those.
Did you try the calibration process?

Related UK Car Questions