How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Car Enthusiast
Category: UK Car
Satisfied Customers: 27137
Experience:  Over 17 years experience diagnosing and repairing automobiles.
14928985
Type Your UK Car Question Here...
Pete is online now
A new question is answered every 9 seconds

Mazda 6: , I have an 08 (Gen 2) Mazda 6. My multi-function

Customer Question

Hello, I have an 08 (Gen 2) Mazda 6. My multi-function display stopped working. I can use the a/c (but I can't see the controls). No clock and radio does not work at all.
Submitted: 1 year ago.
Category: UK Car
Expert:  Pete replied 1 year ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
My info is limited on your model here but I see no one else has responded and thought I would see if I can help here.
I would have programming checked in the door/window control unit to see if this is a programming issue as some of these needed programmed by a dealer in order to operate properly.If this is checked and all found to be o.k. this may have been a voltage surge that damaged the display unit itself needing replaced.
Thanks Pete