How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt
Matt, Mechanical Engineer
Category: UK Car
Satisfied Customers: 21495
Experience:  BEng hons Mech engineering, in auto industry 22 years
12772297
Type Your UK Car Question Here...
Matt is online now
A new question is answered every 9 seconds

Ford mustang289: rebult 289 all usualthings crank pistons etc

Customer Question

rebult 289 all usualthings crank pistons etc but it will not tick over and on low ravs very lumpy and stalls only thing i have found is the front block of 4 plugs are running wesk and the back 4 are sutted up hope yoy have some idea thanks
Submitted: 1 year ago.
Category: UK Car
Expert:  Matt replied 1 year ago.
Hello OK if you haven't already then I'd suggest doing a quick compression test across all cylinders they should all be within 10-15 psi of each other , if some are signifigently less then I'd move onto checking the cam timing as if this is along way out then you get a large mixture scatter
Expert:  Matt replied 1 year ago.
Hi Richard

do you still need help ?