How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kevin Your Own Question
Kevin
Kevin, UK Car Mechanic
Category: UK Car
Satisfied Customers: 1442
Experience:  Diagnostic technician at vw /audi specialist
84635724
Type Your UK Car Question Here...
Kevin is online now
A new question is answered every 9 seconds

Can you help me with a Suzuki Swift car

Customer Question

Hi can you help me with a Suzuki Swift car
Submitted: 1 year ago.
Category: UK Car
Customer: replied 1 year ago.
I WANT TO KNOW HOW TO REMOVE THE CAMBELT (CHAIN)) I NEED TO REMOVETHE HEAD TO REPLACE THE HEAD GASKET
Customer: replied 1 year ago.
THIS IS WORK DONE ON A 2006 SUZUKI SWIFT CAR. ITS A 1500cc
Expert:  Kevin replied 1 year ago.
Hi I'm kev I will give you the guide I have for this vehicle Valve timing procedures WARNING: Engines with variable valve timing: Mark camshafts, camshaft sprockets, camshaft adjusters and related camshaft drive system components (as applicable) with chalk or paint prior to removal or dismantling to assist alignment on installation. Removal/installation of timing chain requires:Engine removal - except Jimny.Sump removal. Align crankshaft keyway at 12 o'clock position Fig.1.1.Ensure timing mark on camshaft adjuster aligned with timing mark on cylinder head Fig.1.2.Ensure timing mark on camshaft sprocket aligned with timing mark on cylinder head Fig.1.3.Remove tensioner assembly before carrying out engine repairs Fig.1.4.Align coloured chain link with timing mark on camshaft adjuster Fig.1.5.Align coloured chain link with timing mark on camshaft sprocket Fig.1.6.Align coloured chain link with timing mark on crankshaft sprocket Fig.1.7.Install tensioner rail Fig.1.8:A - Jimny: Tightening torque: 22 Nm.B - All other models: Tightening torque: 25 Nm. Install chain guide Fig.1.9.A - Jimny/Ignis: Tightening torque: 9 Nm.B - All other models: Tightening torque: 11 Nm. Reset tensioner before installation:Rotate and push plunger through tensioner body in direction of arrow Fig.1.10 & Fig.1.4.Insert wire clip to retain tensioner plunger Fig.1.11. Install tensioner assembly.Remove wire clip Fig.1.11.Tighten crankshaft pulley bolt to 150 Nm Fig.1.12.
Expert:  Kevin replied 1 year ago.
Please rate if no further questions