How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mark Your Own Question
Mark
Mark , UK Car Mechanic
Category: UK Car
Satisfied Customers: 1504
Experience:  Over 30 yrs trade experience
69494627
Type Your UK Car Question Here...
Mark is online now
A new question is answered every 9 seconds

how do you check the codes on a toyota vista deo. engine 3-S.

Customer Question

how do you check the codes on a toyota vista deo. engine 3-S. D4.MODEL 1999.CHASSIS SV-500024065.which terminals should i bridge?
rgds peter
Submitted: 3 years ago.
Category: UK Car
Expert:  Mark replied 3 years ago.

markthebooler :

Hello. My name is Mark and I will be assisting you today.

markthebooler :

You can bridge over terminals 4 and 13 to access the flash codes.

Customer :

Dear mark

Customer :

Dear mark,the car has obd 11 or obd 2 system.there no numbers.diagnosis provision is near fuel pedal inside the car.

markthebooler :

Does it not have a 16 pin plug?

Customer :

you have not responded to my D4 question

markthebooler :

OBD2 plug connector should be 16 pins. You bridge over pins 4 and 13 to access the codes.

Customer :

ok i will brigde in the morning,when iam in the workshop.get back back to you tomorrow

Customer :

best regards,peter

Customer :

Dear mark,i bridged 4 and 13. it worked.thanks so much.it has given me codes 24 and 89.i know 24. help me 89 code.tell me the name and where its located.The car gave me these codes when it was idling.when its off,ignition on,it shows all is ok.so i checked while the engine was running.