How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marty Your Own Question
Marty, European Car Expert
Category: UK Car
Satisfied Customers: 53007
Experience:  ASE & Bosch Certified Master Tech. Over 30 years experience.
Type Your UK Car Question Here...
Marty is online now
A new question is answered every 9 seconds

Hyundai Santa Fe: Hi,Hyundai Santa Fe 2007 rear wheel hub

This answer was rated:

Hyundai Santa Fe 2007 rear wheel hub replacement.
Can the axle be pushed in when loosening the axle nut on the wheel hub so i get access to the 4 nut's for the bearing hub ?
Hi, I don't think you can get the axle pushed back far enough to get a wrench on the 4 hub bolts. You are going to need to remove the rear wheel carrier in order to replace the hub. I've attached the workshop instructions below. Let me know if you need anything else.

Remove Rear Hub / Wheel Bearing
Marty and other UK Car Specialists are ready to help you
Customer: replied 3 years ago.

Thanks, XXXXX XXXXX a more complicated job than I was hoping then :)


Yes it's a bit involved. You can probably swing the wheel carrier up out of the axle without actually removing it but there is still a good bit of disassembly involved and you still have the coil spring to deal with.

Let me know if you need anything else.

Related UK Car Questions