Recent Feedback
98 range rover 4.6, getting code p1313, manujfactuer controlled ignition system or misfire. vehicle has had injectors and plugs and wires replaced, what should i be cking
Country: United Kingdom
Hi and welcome back.
I'd be looking at the crankshaft position sensor on that fault code.
Pretty common fault on that engine.
Try giving the harness plug a good clean on the crankshaft sensor but you usually end up replacing them. It is on the block on the opposite side to the starter motor.
regards
Mechanic Martyn
Experience: Advanced trade certificate in Automotive engineering. 30+ years in the automotive industry
will let you know thnks