How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask snapon1979 Your Own Question
snapon1979
snapon1979, UK Car Mechanic
Category: UK Car
Satisfied Customers: 9
Experience:  UK car technician
59723107
Type Your UK Car Question Here...
snapon1979 is online now
A new question is answered every 9 seconds

Isuzu D-Max/Rodeo isuzu d-max 3.0 ltr TD LS, 2005 model double

Customer Question

isuzu d-max 3.0 ltr TD LS, 2005 model double cab... loosing power in all gears when i the put throttle down....... a struggle to reach 120km/h in 5th gear but when it does engine management will either flash on and off or wait on for about 5 seconds and switch off again once u let off the throttle???? what is cause of this?? thank you
Submitted: 5 years ago.
Category: UK Car
Expert:  snapon1979 replied 5 years ago.

Hello there.

 

Do you have any fault codes stored in the ecu memory.

 

Thanks.

Customer: replied 5 years ago.

hello,

i dont know if there is as i just bought it in march of this year . i havent done anything with the ecu since i got it.....

it has ran perfectly since this . it struggled again on me this evening this time in 2nd gear with the engine managment light flashing on and off....... i might take out the cat tomorrow and see if thats gone causing this fault?? when i bought the jeep the engine oil level was a bit over the full mark on the dipstick so maybe that has damaged the cat over time?????????

 

thank you.

Expert:  snapon1979 replied 5 years ago.

The first thing you should do is have the fault memory checked to see what fault codes are stored. I would not remove the catalyst just yet.

 

Thanks

Customer: replied 5 years ago.

i found fault codes ..... P0216.....P1614......P1612 & P1613 that were stored in the ecu memory... do you know what these codes are???

 

Thanks.