Hi there hope i can be of assistance,
did the engine stall, or was this human error causing the stall?
ok, this is a regular fault on the LDV, have seen this a few times now
often this is caused when changing a battery, jump starting or bump starting the van
this could potentially also be triggered by stalling the van
The warning lamp means the ECU has stored a fault code, often triggered by mistake
however, you will need to have this light reset using diagnostic equipment, so they can check the fault codes and erase or diagnoses as necassary
this dosent have to go to an LDV agent, most workshops will have the right equipment to do these basic tests