How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Merc320 Your Own Question

Merc320
Merc320, UK Car Mechanic
Category: UK Car
Satisfied Customers: 176
Experience:  City & guilds pt 1 & 2
Type Your UK Car Question Here...
Merc320 is online now
A new question is answered every 9 seconds

how can i remove lock barrel from 07 ford transit .....have

Customer Question

how can i remove lock barrel from 07 ford transit .....have it all stripped down with horse shoe clip off but barrel still not free....thanks cj
Submitted: 4 years ago.
Category: UK Car
Expert:  Merc320 replied 4 years ago.

Hi

With the key in ignition turn to position one & then push little button under barrel sleeve.

Regards

Malc.

Customer: replied 4 years ago.
hi trid that but no good ...... the original door was damaged ... got a second hand one but no key with it .... have the new door fitted now and central lock works with original fob but in case of power failure obiousley original key wont open or lock new door manually so i wanted to swap over barrels .... have lock assembley and barrel removed in one piece from original door via use of a grinder .... connected it to wiring harness turned key to 1 but button still wont release .... any way of removing new door barrel without key .... cheers cj
Expert:  Merc320 replied 4 years ago.

Hi

Sorry thought you were trying to remove ign barrel.

The door barrel should come out without key but its a major strip.

Malc.

Customer: replied 4 years ago.
so where do i go from here....
Expert:  Merc320 replied 4 years ago.

Hi

If you have the horseshoe clip off it should come out, that holds it in.

A light tap could be needed. But thats youre decision sorry.

Malc

Customer: replied 4 years ago.
hi again ... barrel seems to be kept inn by a little silver button on the side that wont de-press on either of the barrels .... is there some computer coding or something else involved to remove barrels from lock mecanism... thanks cj

JustAnswer in the News:

 
 
 
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
 
 
 

What Customers are Saying:

 
 
 
  • Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help. Mary C. Freshfield, Liverpool, UK
< Last | Next >
  • Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help. Mary C. Freshfield, Liverpool, UK
  • This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!! Alex Los Angeles, CA
  • Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult. GP Hesperia, CA
  • I couldn't be more satisfied! This is the site I will always come to when I need a second opinion. Justin Kernersville, NC
  • Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around. Esther Woodstock, NY
  • Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know. Robin Elkton, Maryland
  • He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here. Diane Dallas, TX
 
 
 

Meet The Experts:

 
 
 
  • Marty

    European Car Expert

    Satisfied Customers:

    349
    ASE & Bosch Certified Master Tech. Over 30 years experience.
< Last | Next >
  • http://ww2.justanswer.com/uploads/EU/eurotec/2012-6-11_13153_mpjaphoto.64x64.JPG Marty's Avatar

    Marty

    European Car Expert

    Satisfied Customers:

    349
    ASE & Bosch Certified Master Tech. Over 30 years experience.
  • http://ww2.justanswer.com/uploads/IN/indytech/2013-8-8_102717_SantoDomingo146598x6402.64x64.jpg Greg's Avatar

    Greg

    Shop Owner

    Satisfied Customers:

    1040
    17 years Shop Owner /Technician. 27 years experience,
  • http://ww2.justanswer.com/uploads/CR/crzydrvr00/2013-11-3_12123_246347.64x64.jpg Richard's Avatar

    Richard

    UK Car Mechanic

    Satisfied Customers:

    472
    12 years as a technician at a Ford and Jaguar dealer Ford and Jaguar factory certified
  • http://ww2.justanswer.com/uploads/35/350matt/2012-6-7_182356_matsavatr.64x64.jpg Matt's Avatar

    Matt

    Mechanical Engineer

    Satisfied Customers:

    4034
    BEng hons Mech engineering, in auto industry 22 years
  • http://ww2.justanswer.com/uploads/NA/nabilc/2011-1-24_205715_jap500.64x64.jpg Billy's Avatar

    Billy

    Trainer/Master tech.

    Satisfied Customers:

    1276
    Trainer - master tech., SAE member
  • http://ww2.justanswer.com/uploads/witt0018/2009-02-09_180738_trev2.jpg Trevor Witting's Avatar

    Trevor Witting

    UK Car Mechanic

    Satisfied Customers:

    815
    NVQ 3, Modern Apprenticeship, MOT Tester, 15+ years experience diagnostic technician
  • http://ww2.justanswer.com/uploads/RO/RobMechanic/068.64x64.JPG Rob's Avatar

    Rob

    UK Car Mechanic

    Satisfied Customers:

    811
    city and guilds level 1 2and 3. mot tester , 28 years experience set up training college in afghanistan