How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask badj Your Own Question
badj
badj, UK Car Mechanic
Category: UK Car
Satisfied Customers: 91
Experience:  BEng Performance Car
14782110
Type Your UK Car Question Here...
badj is online now
A new question is answered every 9 seconds

inlet & exhaust valve clearances for my nissan navara qd32 enjine.

Resolved Question:

What are the inlet & exhaust valve clearances for my Nissan Navara QD32 enjine.
Submitted: 7 years ago.
Category: UK Car
Expert:  badj replied 7 years ago.

Hi there,

 

I have the clearances both recorded as 0.40mm/0.012 - 0.016 inch - (inlet and exhaust).

These clearances should be set when the engine is warm (but not running!)

 

The procedure is as follows:

With Cyl #1 at TDC (compression stroke), adjust clearances on valves 1, 2, 3, & 6
With Cyl #4 at TDC (compression stroke), adjust clearances on valves 4, 5, 7, & 8

 

 

 

Regards

 

Chris

 

 

badj and 2 other UK Car Specialists are ready to help you