How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel T. Your Own Question
Daniel T.
Daniel T., Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 15632
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your UK Appliance Question Here...
Daniel T. is online now
A new question is answered every 9 seconds

Rob I am trying to fault find a Bosch WF2450 washing M/C -

Customer Question

Hi rob I am trying to fault find a Bosch WF2450 washing M/C - symptom is No response from M/C - plugged in ok - fuse checked ok
power traced through input choke (I am qualified electrician - retired) - power to circuit board ok but no response - checked all plug / socket connections ok - checked circuit board visually for overheat / burning - none - suspect an interlock - any thoughts?
Submitted: 1 month ago.
Category: UK Appliance
Expert:  Daniel T. replied 1 month ago.

Hi, I'm Daniel welcome to JustAnswer, Im reviewing your question now and will post back with your reply momentarily

Expert:  Daniel T. replied 1 month ago.

The interlock wont cause this fault. As if the lock was faulty the front control panel will still all light up but just wont start a cycle.

So as you dont have any lights comming on and the power supply to the washer is fine and you have power into the control board then its going to be the control board itself at fault.

As if theres power there but nothing coming on then this will only be down to a faulty control board and not a interlock fault im afraid.

Sorry its not good news but this is looking like the control board is the fault here.