How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel T. Your Own Question
Daniel T.
Daniel T., Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 15172
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your UK Appliance Question Here...
Daniel T. is online now
A new question is answered every 9 seconds

I have an Err.09 after a nights delay. Few times, I hope so.

Customer Question

Hi, I have an Err.09 after a nights delay.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: Few times
JA: Do you plan on doing the work yourself?
Customer: I hope so. Smeg model PLA6442X
JA: Anything else we should know to help you best?
Customer: Maybe you know, where I should start looking for a problem
Submitted: 1 month ago.
Category: UK Appliance
Expert:  Daniel T. replied 1 month ago.

Hi, I'm Daniel welcome to JustAnswer, Im reviewing your question now and will post back with your reply momentarily

Expert:  Daniel T. replied 1 month ago.

Err 09 means a water filling fault.

Basically the dishwasher has a filling fault in there. Things to check are the water supply it turned on and the water pressure is good.

If thats fine then you need to check the water inlet valve and see if this is faulty. As this is the part that lets the water in.

Other then the water valve the other parts involved in the filling is the pressure switch underneath and the control board.

So check the water supply first to the dishwasher and if thats fine then you need to check the water inlet valve with a multi meter and see if faulty.

If you need anymore info just get back to me.

Regards

Expert:  Daniel T. replied 1 month ago.

Hi

I see the question is still open, Do you need help on this still?

If not then if you could remember to rate the answer that would be great.

Many thanks