How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel T. Your Own Question
Daniel T.
Daniel T., Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 14821
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your UK Appliance Question Here...
Daniel T. is online now
A new question is answered every 9 seconds

Model GO482 stain vanish light flashes 5 times nothing

Customer Question

Model GO482 stain vanish light flashes 5 times nothing happens
Submitted: 21 days ago.
Category: UK Appliance
Expert:  Daniel T. replied 21 days ago.

Hi, I'm Daniel welcome to JustAnswer, Im reviewing your question now and will post back with your reply momentarily

Expert:  Daniel T. replied 21 days ago.

5 flashes on this is a NTC (temperture sensor) fault.

What you need to do is pull the washer out and remove the back panel.

There you will see the heater. Either located in the center of the heater or near it is the NTC. It will have 2 thin wires going to it.

Check the wires and see if theres any broken. If the wires are fine then you need a multi meter to test it. The resistance should be in Kohms. If faulty then you need to replace the NTC.

But if the ntc and wires are fine then im afraid its looking like it could be the control board at fault here im afraid.

So try the above and see what you find and let me know.