How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob
Rob, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 3409
Experience:  20 yrs. experience with a major worldwide manufacturer.
14831508
Type Your UK Appliance Question Here...
Rob is online now
A new question is answered every 9 seconds

I have an ewf1074 and there is no water coming into the

Customer Question

I have an ewf1074 and there is no water coming into the machine the machine drains and then it just stops I have replaced the inlet valve already.
When you do a delicate wash the machine will start and it will fill up.
Just wondering what this could be
Submitted: 7 months ago.
Category: UK Appliance
Expert:  bonzaco replied 7 months ago.

Hi my name is ***** ***** do you have the product code which is on the rating label inside the door frame it is 9 or 11 numbers long. Secondly do you have a multimeter or two probe mains tester?

Customer: replied 7 months ago.
The number is###-##-####An i do not have a meter tester at this stage
Expert:  bonzaco replied 7 months ago.

OK when you say drains do you refer to the short priod at the start of the cycle or after the wash phase?

Customer: replied 7 months ago.
correct and then it just stops
Expert:  bonzaco replied 7 months ago.

Ok after a short pause do you hear a buzz near the water inlet pipe?

Customer: replied 7 months ago.
Nope no buzz
There is just nothing
Expert:  bonzaco replied 7 months ago.

OK you now need to check the pcbs to see if you have got any burned off tracks or melted components - make sure you mark up where you take the cables off.