How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 3409
Experience:  20 yrs. experience with a major worldwide manufacturer.
Type Your UK Appliance Question Here...
Rob is online now
A new question is answered every 9 seconds

We have purchased an efe956ba stove but have had two

Customer Question

we have purchased an efe956ba stove but have had two different oppinions from electricians on what is required to hook it up to our house.. we currently have a 30amp fuse with 6mm wires .. do you have any suggestions ? thanks damian
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: about a week as we are doing up the whole kitchen.. there is no real rush but want to make sure we do it correctly..
JA: Do you plan on doing the work yourself?
Customer: not the electrics..
JA: Anything else we should know to help you best?
Customer: not for the moment .. thanks again any help will be appriciated
Submitted: 13 days ago.
Category: UK Appliance
Expert:  George-Allsorts replied 12 days ago.

The EFE956BA - Manufacturers instructions specify that if in NZ then this must be connected with a 10mm cable. This is relative to NZ regs.

If you are in AUS then you have two options:

Breaker of 32A on 6mm (Diversity - Not all elements are going to be drawing on the source at one time)

40A 50A or 63A on 10mm (lessening the diversity)

It depends on what usage you are going to load the appliance with... If it is light/normal use then go for the 32A/6mm but if it it party time every day then go for a more rigorous fitting

Related UK Appliance Questions