How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob
Rob, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 3409
Experience:  20 yrs. experience with a major worldwide manufacturer.
14831508
Type Your UK Appliance Question Here...
Rob is online now
A new question is answered every 9 seconds

Zanussi ZDT12011FA dishwasher has pump running all the time.

Customer Question

Zanussi ZDT12011FA dishwasher has pump running all the time. Have pulled out of unit and water is dripping from base. I presume I need to replace some sort of seal, but where from?
JA: Just to clarify, what's the make and model of your dishwasher? And have you run a diagnostic test cycle?
Customer: It's a Zanussi ZDT12011FA. And no I haven't run a diagnostic, as the end cycle alarm beeb x3 flash x3. Pump runs as soon as I switch it back on and can't get it to do anything else.
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: No, reasonably capable if have instructions to follow.
Submitted: 1 month ago.
Category: UK Appliance
Expert:  Daniel T. replied 1 month ago.

Hi, I'm Daniel welcome to JustAnswer, Im reviewing your question now and will post back with your reply momentarily

Expert:  Daniel T. replied 1 month ago.

Can you see the part thats leaking?

If you remove the right hand side panel of the dishwasher and carefully set it going on a wash watch it from there and see if you can see were the water is leaking from and let me know.

Regards