How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eddie Your Own Question
Eddie
Eddie, Home Improvement Contractor
Category: UK Appliance
Satisfied Customers: 575
Experience:  owner of Island Pro-Craft
90350505
Type Your UK Appliance Question Here...
Eddie is online now
A new question is answered every 9 seconds

My Whirlpool ADP 4502/5 dishwasher does not start and its

Customer Question

My Whirlpool ADP 4502/5 dishwasher does not start and its green light flashes
JA: Can you guesstimate how old your Whirlpool is? And just to clarify, what's the exact model?
Customer: 10 years approx. AAA class with the above detail.
JA: Do you plan on doing the work yourself?
Customer: No plan at this stage. First trying to find out what is wrong.
JA: Anything else we should know to help you best?
Customer: Don't think so.
Submitted: 2 months ago.
Category: UK Appliance
Expert:  Eddie replied 2 months ago.

Hi ......my name is ***** ***** I will be helping you today .......I will have some questions for you ......

does it flash a number of times and then pauses or steady flashing?

Customer: replied 2 months ago.
Flashes consistently and continuously. Then nothing.
Expert:  Eddie replied 2 months ago.

If the model number is ***** we can probably find out diagnostically what might be wrong with it ...........we need to get it to blink a code so if we can try this and you can let me know where we are at .......

Turn the dishwasher on

Press the rinse cycle button
Turn the dishwasher back off
Hold down the start button while you turn the dishwasher back to on. When the light starts flashing let go of the start button

Press the start button one time and shut the dishwasher door
A test cycle should start
If an error is found the cycle will stop, the flashing error code will then display