How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Techdesk Your Own Question
Techdesk
Techdesk, Field Service Engineer
Category: UK Appliance
Satisfied Customers: 16407
Experience:  Whitegoods engineer working for a multibranded national company in the UK.
13782322
Type Your UK Appliance Question Here...
Techdesk is online now
A new question is answered every 9 seconds

F43 error bosch was327 i need to reset, 6-8 years

Customer Question

f43 error bosch was327 i need to reset
JA: Can you guesstimate how old your Bosch is? And just to clarify, what's the exact model?
Customer: 6-8 years was327b1sn/18
JA: Do you plan on doing the work yourself?
Customer: have done that.
Submitted: 4 months ago.
Category: UK Appliance
Customer: replied 4 months ago.
No help??
Expert:  Techdesk replied 4 months ago.

Hiya,

Sorry for the delay in getting to you, I've only just logged on and seen your question waiting.

If you have repaired the fault on the machine then the reset procedure in the service manual is as follows.

Close the door -

Set program selector switch to position 0 ("OFF") -

Set program selector switch to position 8 (6:00 o'clock) - W

ait until the start LED is flashing.LED Start/Pause is flashing -

Actuate and hold the “Spin speed” button -

Set program selector switch to position 9 (turn clockwise)state LED’s and seven-segment display are illuminated for a period of 3 sec -

Release the “Spin speed” button.

Turn to off then back on.

You may have to do this several times to clear all errors in memory.

Hope this helps

Thanks

Customer: replied 4 months ago.
LED Start/Pause do not start flashing ??
anything else i can do ??
Expert:  Techdesk replied 4 months ago.

Hiya,

Just ignore the flashing light part, keep trying the reset.

If it won't clear, then it would suggest a damaged board or motor and a new code is being generated.

Let me know how it goes.

Thanks