How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel T. Your Own Question
Daniel T.
Daniel T., Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 14831
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your UK Appliance Question Here...
Daniel T. is online now
A new question is answered every 9 seconds

All the lights stay : to day : yes : we have a Lamona dish

Customer Question

all the lights stay
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: to day
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: we have a Lamona dish washer we cannot reset it all lights are on?
JA: What's the make and model of your machine? And can you guesstimate how old it is?
Customer: HJA8630 HJA8640
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Appliance Technician about your situation and then connect you two.
Submitted: 6 months ago.
Category: UK Appliance
Expert:  Daniel T. replied 6 months ago.

Hi

If all the lights are lit and wont go out then this is nearly always the display board at fault.

If you remove the wooden door panel and then remove the plastic control panel.

There you will see the display board on the right as its the one that has the lights on it.

Then theres a main control board on the left.

For this fault you have its nearly always the display board that causes this fault. You need to replace the display board and that should cure the fault.

But if it doesnt then the main control board is the fault. But 8 times out of 10 for this fault its the smaller display board thats the fault on these dishwasher.

If you need anymore info just get back to me.

Regards