How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob
Rob, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 3409
Experience:  20 yrs. experience with a major worldwide manufacturer.
14831508
Type Your UK Appliance Question Here...
Rob is online now
A new question is answered every 9 seconds

My dwf 50 is over filling with no fault lights on

Customer Question

my dwf 50 is over filling with no fault lights on
Submitted: 8 months ago.
Category: UK Appliance
Expert:  bonzaco replied 8 months ago.
Do you mean that it fills when not switched on?
Customer: replied 8 months ago.
no the m/c is running and towards the end of the cycle it starts filling an overflows into the room
Expert:  bonzaco replied 8 months ago.
OK the first thing I would be doing is checking that the pressure switch and its pressure pipe are not blocked.
Customer: replied 8 months ago.
where is this what does it look like
Expert:  bonzaco replied 8 months ago.
If you take off the right hand side it is a small round black object with wires coming out of the side and a clear plastic tube coming out of the bottom. The pressure switch tube should be checked for blockages and then reassembled once clean. Do you get any alarm codes showing when the appliance overfills? This consists of either one or two leds flashing.
Customer: replied 8 months ago.
no
Expert:  bonzaco replied 8 months ago.
OK you need to check the pressure switch hose for obstructions and clear them if needed.