How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel T. Your Own Question
Daniel T.
Daniel T., Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 14834
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your UK Appliance Question Here...
Daniel T. is online now
A new question is answered every 9 seconds

I am having issues with my cda cw 195/1

Customer Question

Hi I am having issues with my cda cw 195/1
Submitted: 10 months ago.
Category: UK Appliance
Expert:  Daniel T. replied 10 months ago.

Hi

5 flashes is a wash motor fault. Ive seen it many times on these whirlpool built dishwasher as they are just badged up CDA.

What you need to do is pull the dishwasher out and lay it on its left side and remove the base.

From there you will see the wash motor at the back. Take this off and just see if theres anything stuck in there.

If that's all clear then the motor itself will be faulty and will need to be replaced. To be honest its more then likely clear but worth checking just in case. Ive seen this fault many times and its nearly always the wash motor at fault.

Now the odd time it has turned out to be the control board but that's very rare as like I said its nearly always the wash motor at fault which causes this fault.

Sorry it not good news but if you need anymore info just get back to me.

Regards

Expert:  Daniel T. replied 10 months ago.

Hi

Just wondering how you got on with the washer as the question is still open?

If you need anymore help then just get back to me.

If not then if you could remember to rate the answer that would be great.

Many thanks

Customer: replied 10 months ago.
Hi not had chance to look at it yet will try to fix the fault this weekend
Expert:  Daniel T. replied 10 months ago.

No worries that's fine.