How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 19057
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

Zwd1262 machine part fills with water then function light

Customer Question

Zwd1262 machine part fills with water then function light goes off and start pause flashes. I can drain machine or use spin etc but when I start load time comes on screen starts to decrease for few minutes while water fills then start pause flash and time adds on minutes all ready done
Submitted: 11 months ago.
Category: UK Appliance
Customer: replied 11 months ago.
Ok I have worked out it's e 36 not good new machine
Expert:  Kelly replied 11 months ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! You may need to replace the main machine PCB module but I would unplug it for at leas 4 hours to allow a full reset before doing anything. Does it change the behavior at all?

Customer: replied 11 months ago.
I replaced machine boxing day.
Expert:  Kelly replied 11 months ago.

I understand, thank you.