How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 19092
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a JLTDC09 condenser dryer with no power it has no

Customer Question

Hi i have a JLTDC09 condenser dryer with no power it has no light on displays and wont turn on, It does nothing, I have checked and power is coming in, The AC is reaching the element when the door is open, but when i close door it stops AC getting to element.
i only know this by using meter inside dryer,
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! No power should be reaching the element unless the machine is running. I suspect there is a problem with the wiring, like maybe there is a short at the element or another wire. Did you test the element for a short to ground?

Customer: replied 1 year ago.
Hi yes, i tested element, but since i have found a resistor r47 on PCB which has blown, would this be the problem?
Thanks
Expert:  Kelly replied 1 year ago.

That does show the PCB is faulty, yes.