How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 19102
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

U15m62nogb/01 Cabinet fan will not switch off.canot find

Customer Question

U15m62nogb/01
Cabinet fan will not switch off.canot find thermostat part no
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! The fan is controlled by the electronic and how the oven sensor reads the temperature. The attached pages give a quick overview of how it all works. Can you still start a bake cycle and it will work?

Customer: replied 1 year ago.
The fan is controlled by the electronic what ?
Your answer is not too clear.
Is there a sensor or part specifically to replace ?
Expert:  Kelly replied 1 year ago.

The fan is controlled by the electronic oven control, the main "brain" of the oven, and the sensor that monitors the temperature. Can you still start a bake cycle and it will work?

Customer: replied 1 year ago.
The electronic timer / clock is working and activates the lower oven when set.
The top oven is working manually and is not designed to work with the timer.
The cooling fan normally runs for twenty minutes after the ovens are switched off but now will not switch off at all.
If the power supply is cut off and then switched on even after twelve hours the fan runs with all controls set to off.
Customer: replied 1 year ago.
After programming the timer to run a delayed cook cycle the problem seems to have cleared itself.
Thank you for your efforts
Customer: replied 1 year ago.
I don't seem to be able to send feedback
Can you help please ?