How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel T. Your Own Question
Daniel T.
Daniel T., Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 14807
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your UK Appliance Question Here...
Daniel T. is online now
A new question is answered every 9 seconds

We have a leisure cooker cuisine 100. The timer doesn't

Customer Question

Hi we have a leisure cooker cuisine 100. The timer doesn't work. How do we reset or replace and where could we obtain correct product. Should it be installed by elec or gasfiter as dual fuelled. Many thanks for your help***@******.***
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Daniel T. replied 1 year ago.

Hi

Can you post the full model number of the appliance please. Its usually on a sticker on the oven cavity as you open the door or if its a range cooker and you have the pan tray at the very bottom it could be on there.

Regards

Customer: replied 1 year ago.
Thank youmodel number is;RCM10FRK;
Serial Number:07 100038 05
CAT:112H3PKind Regards ***** *****
Expert:  Daniel T. replied 1 year ago.

Hi

Thanks for that. Click here for the part it will come up as a Beko part but don't worry about it as they are the same timer.

But to fit this you will need to remove the complete hob to do this. So if you are good at diy repairs then remove the hob top to access it.

But if you are not confindent at doing this yourself then you will need to get a gas safe engineer in as for an engineer to do this you need to get a gas safe engineer in as the top is gas so even through you don't disconnect the gas it has to be a gas safe engineer that carrys out the repair f you get some one in.

Regards