How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 19113
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a Siemens IQ500 dryer. After one minute, the dryer

Customer Question

Hi, I have a Siemens IQ500 dryer. After one minute, the dryer stops and beeps and the condenser symbol flashes.
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! There is likely a sensor that has failed and the controller is getting a signal that the condenser needs attention.

May I please have your model number so I am able to provide you with accurate, model specific information?

Customer: replied 1 year ago.
WT46S592AU/43
Expert:  Kelly replied 1 year ago.

Thank you! The video below will show you how to clean the pump area, I suspect that is the issue. Be sure to clean the float area very well and make sure it moves freely.

CLICK HERE