How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 15764
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your UK Appliance Question Here...
Daniel is online now
A new question is answered every 9 seconds

After putting washing in machine, turned the dial to daily

Customer Question

After putting washing in machine, turned the dial to daily wash 30c-fast 32', it starts to put water in then stops and keeps doing it and doesn't start the wash, please could you tell me how to get around this problem.
Thanks.
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Daniel replied 1 year ago.

Hi

Can you post the make and model number please.

Regards

Customer: replied 1 year ago.
hi, thanks for getting back, not too sure if i had got through to you.
the model number is ***** GOF 462.
Thanks
Expert:  Daniel replied 1 year ago.

Hi

Ok so when you set it going is the washer just filling all the time?

If you set the washer to a spin only will the drum turn at all?

Regards

Customer: replied 1 year ago.
have tried the spin only and other features and it still does the same thing, it will start the water running for a minute then stops and with in about five seconds the water runs again and stops and it carries on like that but will not turn the drum to wash.
Expert:  Daniel replied 1 year ago.

Ok just to double check if you set it to a spin only its still fills and then stopping and filling again is this correct?

Customer: replied 1 year ago.
that's right, we turned the dial to the spin selection button but it started to run the water, i also tried the usual setting that i use and it started to do the same with the water running and the stopping and starting. we have left it for a while and have just tried the machine again and we are not sure if it is now working but until it has done the cycle we don't really know, if it goes through, it could have been a button somehow had got jammed but and again we are not sure, if its ok with you i will come through again in the morning to let you know. Thanks
Expert:  Daniel replied 1 year ago.

No worries thats fine. Just let me know in the morning how its got on.

Regards